Skip to content 
Wear Linings
- Rubber sheeting, used in rubber of launders, pipes, tanks
- Moulded wear rubber liners
- Ceramic and composite liners
- Ceramic Tiles in ZTA, Alumina, PSZ or silicon carbide
- PTFE linings in fabricated sections with added MoS2 and a high wearing compound
- Spun or Cast Polyurethane
- CCO plate ( Chromium Carbide)
- Moulded rubber linings\
- Manganese liners
-
The widest range of metal liners, including many alloys, all customsed to suit operational parameters
- Magnetic backed Ceramic faced wear liners
Wear Linings
Australian Mining Product and Services
- Protective lining for every operational parameter
- Design of Material and fluid handling transfer components.
- Offer 3d general arrangement, shop drawings to aid visual understand as well as fabrication.
- Co-ordination and oversee the manufacture of all work to the relevant required standard.
- Offer an on going asset wear reliability monitoring and reporting program to assist with a measurable outcome to deliver reach going improvements.
Our objective with any wear lining is to offer the end user sufficient relevant information, that will enable the end user to determine.
- The best suited wear lining material for the application.
- The optimum thickness of linear
- The best profile in the liner
- The optimum fixing arrangements
Australian Mining Product and services do not preference one specific liner material over another lining rather we identify the wear lining material to be used to deliver
- An improved reliability on liner life
- An increase in the plant and equipment up time
- A reduction in the maintenance change over durations
- An improvement in material flow by elimination material blockages
Our range of wear lining materials cover
92% Alumina
Zirconia Toughened Alumina (ZTA)
Partially Stabilized Zirconia (PSZ)
We manufacture and supply sites around Australia
